Maintenance Tips for the POWERMAX-XP WDH20X WATER PUMP 2″

1. Add Water Before Starting

Always put water inside the POWERMAX-XP WDH20X WATER PUMP 2″ before starting. Do not run the pump without water because it can get damaged.

2. Clean the Water Filter

Dirt and sand can block water flow. Clean the filter of the POWERMAX-XP WDH20X WATER PUMP 2″ often, especially when pumping dirty water.

3. Check Engine Oil

Check oil before using the POWERMAX-XP WDH20X WATER PUMP 2″. Change the oil regularly to keep the engine working well.

4. Use Clean Fuel

Always use clean fuel in the POWERMAX-XP WDH20X WATER PUMP 2″. Dirty fuel can block the engine and cause starting problems.

5. Check Water Hoses

Look at the hoses connected to the POWERMAX-XP WDH20X WATER PUMP 2″. Replace hoses that have cracks or leaks.

6. Let the Pump Cool

Do not run the POWERMAX-XP WDH20X WATER PUMP 2″ for many hours without stopping. Let it cool to avoid overheating.

7. Keep Air Flow Open

Place the POWERMAX-XP WDH20X WATER PUMP 2″ in an open place. Do not block air holes.

8. Remove Water After Use

After using the POWERMAX-XP WDH20X WATER PUMP 2″, remove all water inside to stop rust.

9. Store in a Dry Place

Keep the POWERMAX-XP WDH20X WATER PUMP 2″ in a dry and covered place when not in use.

10. Check for Problems

If the POWERMAX-XP WDH20X WATER PUMP 2″ makes strange noise or pumps less water, stop using it and check it.