Maintenance Tips for the KATO GERMANY WP20 GASOLINE WATER PUMP 2″
1. Add Water Before Starting
Always put water inside the KATO GERMANY WP20 GASOLINE WATER PUMP 2″ before starting. Do not run the pump without water because it can get damaged.
2. Clean the Water Filter
Dirt and sand can block water flow. Clean the filter of the KATO GERMANY WP20 GASOLINE WATER PUMP 2″ often, especially when pumping dirty water.
3. Check Engine Oil
Check oil before using the KATO GERMANY WP20 GASOLINE WATER PUMP 2″. Change the oil regularly to keep the engine working well.
4. Use Clean Petrol
Always use clean petrol in the KATO GERMANY WP20 GASOLINE WATER PUMP 2″. Dirty fuel can block the engine and cause starting problems.
5. Check Water Hoses
Look at the hoses connected to the KATO GERMANY WP20 GASOLINE WATER PUMP 2″. Replace hoses that have cracks or leaks.
6. Let the Pump Cool
Do not run the KATO GERMANY WP20 GASOLINE WATER PUMP 2″ for many hours without stopping. Let it cool to avoid overheating.
7. Keep Air Flow Open
Place the KATO GERMANY WP20 GASOLINE WATER PUMP 2″ in an open place. Do not block air holes.
8. Remove Water After Use
After using the KATO GERMANY WP20 GASOLINE WATER PUMP 2″, remove all water inside to stop rust.
9. Store in a Dry Place
Keep the KATO GERMANY WP20 GASOLINE WATER PUMP 2″ in a dry and covered place when not in use.
10. Check for Problems
If the KATO GERMANY WP20 GASOLINE WATER PUMP 2″ makes strange noise or pumps less water, stop using it and check it.